Logo

FNK0108

  • Installing Raspberry Pi OS
    • Important Information
      • Get Support and Offer Input
      • Safety and Precautions
      • About Freenove
      • Copyright
    • List
    • Installing Raspberry Pi OS
      • 1 Flashing OS to SD Card or USB Drive
        • 1.1 Component List
          • Required Components
        • 1.2 Raspberry Pi OS
          • Automatically Method (Recommended)
          • Manually Methed
          • Choose Raspberry Pi Device
          • Choose Operating System
          • Choose Storage Devide
          • Customisation
          • Writing System to Micro SD Card
          • Done
        • 1.3 HDMI Monitor desktop
        • 1.4 Remote desktop & VNC
          • Mac OS Remote desktop
          • Windows OS remote desktop
        • 1.5 VNC Viewer & VNC
          • Enable VNC
          • Set Resolution
      • 2 Flashing OS to NVMe SSD
        • 2.1 SSD Detection
        • 2.2 Enable PCIe 3.0(on OS written into SD Card)
          • Enable PCIe Gen 3.0
        • 2.3 SSD Partitioning and Formatting
        • 2.4 Flashing the OS
        • 2.5 Enable PCIe 3.0 (on system written into SSD)
        • 2.6 Booting from SSD
          • Configuring the Boot Order
  • Base
    • Important Information
      • Getting Started
      • Get Support and Offer Input
      • Safety and Precautions
      • About Freenove
      • Copyright
    • Preface
      • Key Features
      • Product Variants
    • List
      • Metal Parts
      • Acrylic Parts
      • Machinery Parts
      • Electronic Parts
        • Freenove Case GPIO Adapter for Raspberry Pi
        • Freenove Power Button Board for Raspberry Pi
      • Freenove M.2 NVMe Adapter Series for Raspberry Pi
        • Electronic Modules
      • Wires
      • Tools
      • Others
      • Rquired but NOT Contained Parts
    • Chapter 1 Introduction to Main Components
      • 1.1 Introduction to Freenove Case GPIO Adapter for Raspberry Pi
      • 1.2 Introduction to Freenove Power Button Board for Raspberry Pi
      • 1.3 Introduction to Freenove M.2 NVMe Adapter Series for Raspberry Pi
        • 1.3.1 Freenove M.2 NVMe Adapter for Raspberry Pi
        • 1.3.2 Freenove Dual M.2 NVMe Adapter for Raspberry Pi
        • 1.3.3 Freenove Quad M.2 NVMe Adapter for Raspberry Pi
      • 1.4 Introduction to Raspberry Pi 5 (RPi 5)
        • GPIO
        • BCM GPIO Numbering
    • Chapter 2 Case Assembly
      • Use of the Screwdriver Bit Holder
      • 2.1 Raspberry Pi Assembly
        • 2.1.1 Installing Standoffs
        • 2.1.2 Connecting CAM/DIS Cable and Installing the Tower Cooler
      • 2.2 Mounting GPIO/Switch/NVMe/Power Board
        • 2.2.1 Assembling GPIO Board and Switch Board
        • 2.2.2 Assembling the NVMe Adapter Board
          • Installing NVMe Adapter Board
          • Installing Dual-NVMe Adapter Board
          • Installing Quad-NVMe Adapter Board
      • 2.3 Case Assembly
        • 2.3.1 Assembling the Power Button and Connecting its cables
        • 2.3.2 Installing Dust Filter, Fans, and Speakers
        • 2.3.3 Placing the RPi into the Case
        • 2.3.4 Installing Acrylic Plates and Foot Pads
    • Chapter 3 APP Control
      • How to Insert and Take out SD Card
      • Installing Raspberry Pi OS
      • 3.1 Boot Behavior & Environment Settings
        • 3.1.1 What to Expect on First Startup
        • 3.1.2 Software Setup
          • Software Packages Update
          • Code downloading
          • Creating Desktop Shortcut
      • 3.2 About the Case Control Software
        • 3.2.1 Dashboard Monitoring
        • 3.2.2 LED Control Interface
        • 3.2.3 Fan Control Interface
          • Temp mode
          • Manual mode
          • Defualt mode
        • 3.2.4 Disable Terminal Display & Disable sudo Password
    • Chapter 4 Speed Test
      • 4.1 SD Card Speed Test
      • 4.2 SSD Speed Test
        • 4.2.1 Mounting SSD Devices
        • 4.2.2 Speed Test
        • 4.2.3 PCIe Gen3.0 Speed Test
          • Enable PCIe Gen 3.0
          • Disable PCIe Gen 3.0
    • What’s next?
  • Pro
    • Important Information
      • Getting Started
      • Get Support and Offer Input
      • Safety and Precautions
      • About Freenove
      • Copyright
    • Preface
      • Key Features
      • Product Variants
    • List
      • Metal Parts
      • Acrylic Parts
      • Machinery Parts
      • Electronic Parts
        • Freenove Case GPIO Adapter for Raspberry Pi
        • Freenove Power Button Board for Raspberry Pi
        • Freenove M.2 NVMe Adapter Series for Raspberry Pi
        • Freenove Case Power Board for Raspberry Pi
        • Freenove Case Adapter for Raspberry Pi
        • Electronic Modules
      • Wires
      • Tools
      • Others
      • Rquired but NOT Contained Parts
    • Chapter 1 Introduction to Main Components
      • 1.1 Introduction to Freenove Case GPIO Adapter for Raspberry Pi
      • 1.2 Introduction to Freenove Power Button Board for Raspberry Pi
      • 1.3 Introduction to Freenove M.2 NVMe Adapter Series for Raspberry Pi
        • 1.3.1 Freenove M.2 NVMe Adapter for Raspberry Pi
        • 1.3.2 Freenove Dual M.2 NVMe Adapter for Raspberry Pi
        • 1.3.3 Freenove Quad M.2 NVMe Adapter for Raspberry Pi
      • 1.4 Introduction to Freenove Case Power Board for Raspberry Pi
      • 1.4 Introduction to Freenove Case Adapter for Raspberry Pi
        • 3.5mm JACK Audio Interface
        • RTC Interface
      • 1.6 Introduction to Raspberry Pi 5 (RPi 5)
        • GPIO
        • BCM GPIO Numbering
    • Chapter 2 Case Assembly
      • Use of the Screwdriver Bit Holder
      • 2.1 Raspberry Pi Assembly
        • 2.1.1 Installing Standoffs
        • 2.1.2 Connecting CAM/DIS Cable and Installing the Tower Cooler
      • 2.2 Mounting GPIO/Switch/NVMe/Power Board
        • 2.2.1 Assembling GPIO Board and Switch Board
        • 2.2.2 Installing the Power Board
        • 2.2.3 Assembling the NVMe Adapter Board
          • Installing NVMe Adapter Board
          • Installing Dual-NVMe Adapter Board
          • Installing Quad-NVMe Adapter Board
      • 2.3 Case Assembly
        • 2.3.1 Assembling the Power Button and Connecting its cables
        • 2.3.2 Installing Dust Filter, Fans, and Speakers
        • 2.3.3 Placing the RPi into the Case
        • 2.3.4 Assembling the Audio-Video Board
        • 2.3.5 Installing Acrylic Plates and Foot Pads
    • Chapter 3 APP Control
      • How to Insert and Take out SD Card
        • Installing Raspberry Pi OS
      • 3.1 Boot Behavior & Environment Settings
        • 3.1.1 What to Expect on First Startup
        • 3.1.2 Software Setup
          • Software Packages Update
          • Code downloading
          • Creating Desktop Shortcut
      • 3.2 About the Case Control Software
        • 3.2.1 Dashboard Monitoring
        • 3.2.2 LED Control Interface
        • 3.2.3 Fan Control Interface
          • Temp mode
          • Manual mode
          • Defualt mode
        • 3.2.4 Disable Terminal Display & Disable sudo Password
    • Chapter 4 Speed Test
      • 4.1 SD Card Speed Test
      • 4.2 SSD Speed Test
        • 4.2.1 Mounting SSD Devices
        • 4.2.2 Speed Test
        • 4.2.3 PCIe Gen3.0 Speed Test
          • Enable PCIe Gen 3.0
          • Disable PCIe Gen 3.0
    • What’s next?
fnk0108-docs
  • Search